As you know the Netgear brand provides theextension for all types of network. For the extension of the mesh networks, youneed an Orbi WiFi extender. So, there is a need to complete the Orbi WiFi Extender Setup. The setup of the Orbi extenders is not that simple like thenormal extenders. There is a need to follow the proper set of steps to complete the Orbi WiFi Extender Setup. Therefore, this guide is here for you to let you know how to complete the Orbi extender setup. So, with this, you would be able to do the extension of the mesh network. So, check out the next section to know more about the steps to complete the setup.
Steps To Complete Orbi WiFi Extender Setup
In order to complete the Orbi WiFi extendersetup, it is very important that you should follow the steps properly. You willfind out the setup process is not similar to the other Netgear extenders. For this, first you need to keep your Orbi extender at the clean and flat surface. Now, you just need to connect it to the power source, but don’t press the power button on the Orbi. In case, if it is already on, then turn it off to start the setup procedure. After that, you need to find the Sync button on your extender. Then, press it and keep it pressed and simultaneously press the power button and then release it. When the bottom LED turns into the white and then blue color, at that time you need to release the Sync button.
On releasing the Sync button, you will see thepulse blue LED is lighting. It means, your Orbi extender is starting. You needto wait for a few minutes till the pulsing blue light doesn't turn into a solid blue color. When it turns into the solid blue color, then it means you can now connect it to any router for network extension. Now, you need to start the setup device either a computer or a smartphone. Then, you need to connect your setup device to the extender’s network with name NETGEAR_EXT.
Once you have connected to the extender’snetwork, then open the web browser of your choice. In the browser, type theaddress as http://www.mywifiext.net and press Enter on the keyboard to get redirected. This will open the Netgear Installation Assistant which will help you to complete the rest of the steps for Orbi WiFi extender setup. So, go with those instructions to complete the setup. When the setup is completed, you see the connection status LED to know the strength for the extended network. If the status LED is blue in color, then it means the network strength is good. When it is amber, then it is weak, and you need to move the Orbit towards the router. In case, the LED is in Magenta color, then it means connection is failed or not in range. And, you need to move the Orbi extender more towards the router and try again to access the network. So, these are the steps you need to complete to extend your mesh network with the Orbi extenders.
Mesh Network Is Extended!
Wrapping up! This blog has explained to you withthe very detailed steps to complete the Orbi WiFi Extender Setup. With this, you need not to worry about the different LED colors. All the meaningsfor LEDs are defined in this blog so that you don’t get confused with different LEDs. So, you just need to complete the steps for the Orbi WiFi Extender Setup and your mesh network is extended. Therefore, don’t take the stress that it is difficult to extend the mesh network. Follow this guide and get connected to the network from anywhere at your home to have access to the network. In case you have issues with the Orbi WiFi Extender Setup, then contact our expert team to have the help. They will explain to you all the details because of which you got the issue. Therefore, you will get the resolution in no time. So, no more internet fluctuation with Orbi extenders in the mesh networks.
